Lcd Messaging - Comdial DSU II System Manual

IMI66–132
3.4.6

LCD Messaging

Description: You can create messages that telephone users can set at their stations to be displayed by
any LCD speakerphone that calls them on the intercom line. The system provides two
standard messages but you can use this programming procedure to create up to 10 custom
messages. System attendants also have access to this feature, but they must use station 10
or 12 to program messages.
To Program: 1. Dial 05.
2. Dial 1–0 for message number.
3. Dial # to clear current message.
4. Refer to the character code table, and compose message (maximum 16 characters).
5. Dial two-digit codes to create message.
6. Dial
7. Dial
3 – 20 Programming The DSU II System
—OR—
dial 10 for pre-programmed message
—OR—
dial 20 for pre-programmed message.
for next message location and repeat steps 2–5.
for configuration mode.
DSU II Digital Telephone System
"LCD MESSAGES "
"XXXX... "
"YYYYYYY... "
"BACK AT "
"CALL"