Assembly Instructions - Hotsy 965SS Operating Instructions And Parts Manual

unpacking
Unpack carefully. Wear safety glasses or goggles while
unpacking, assembling, or operating pressure washer.
If there are missing components or hidden damage,
immediately contact carrier concerning discrepancies.
1. Cut strapping band from pressure washer and pal-
let.
2. Remove pressure washer from pallet.
parts included
• Pressure Washer
• Pressure Hose
• Wand
• Operating Instructions and Parts Manual
• Gasoline Engine Manual
• Parts Bag Containing:
Pressure Nozzles (3 Ea.)

 Trigger Gun
 Battery Terminals (2 Ea.)
tools required
• 8" Adjustable Wrench
• Teflon Tape
• Flat Blade Screwdriver
pressure hose, trigger gun and Wand
1. When assembling, use teflon tape on all threaded
plumbing connections to prevent leakage.
2. Install the pressure hose on the pressure washer as
shown in figure 1.
relief valve
pressure hose
Figure 1 - Pressure Hose Installation
assembly instructions
coil outlet
97-6554 • HOTSY 965SS-1075SS • REV. 5/06
3. Assemble wand components as shown in figure 2.
Quick disconnect
Quick
disconnect plug
pressure
Figure 2 - Wand Assembly
NOTE: The pressure nozzle is not to be installed at
this time.
4. Make sure all plumbing connections are tight.
battery
WARNING: Wear eye, hand and skin protection when
handling or connecting battery.
WARNING: Batteries generate explosive gases during
normal battery operation.
WARNING: DO NOT expose the battery to flame or
sparks as these gases may ignite.
WARNING: Battery fluid is highly acidic. If battery fluid
contacts skin or clothing, wash immediately with soap
and water. If battery fluid enters eye, immediately flood
eye with running cold water for at least 15 minutes
and get immediate medical attention.
1. electric start machines only: Place battery in bat-
tery box (battery not included). Use a standard 12 volt
automotive battery. Select a battery similar to the one
in figure 3 for proper fit and installation.
8-3/4"
max
Figure 3 - Battery Dimensions
Wand
Quick
disconnect
trigger gun
hose
10-1/2"
max
6-3/4"
max
7