Parameter Programming, Residual Moisture Control - Electrolux Wascator TT200 Operating And Installation Manual

Parameter programming 200/270 litres
Applies only to machines with RMC.
At the works, the tumbler has been set at a specific value, such as: length of running time per
coin, temperature, cooling, reversing, etc.
These different parameters (number of parameters can vary from type to type) can be
changed by turning the key switch at the front of the machine (cannot be engaged when the
machine is in operation or the door closed).
When engaging the program, always start with parameter 01.
Press the start button (Enter) repeatedly to reach the parameter number to be changed.
When the parameter programming is engaged, the LEDs indicate the current parameter:
LED Drying
LED Cooling
LED Key
LED Filter
Parameter 1 - 7
Drying
Cooling
Key
Filter
Display
=
=
=
=
16
17
18
19
C
Count upwards
C
Count downwards
C
Reset
Factory setting.
Parameter 16-19
Storage dry +
6 minutes extra drying.
Storage dry
Iron dry
for iron
Iron dry
for ironing machine.
Enter
Stores value.
Shift to next
parameter
19