Contents Contents 1 Safety Precautions ..........................5 Additional safety precautions for gas heated tumble dryer .............7 General information ........................7 Commercial use only........................7 Ergonomics certification ......................7 Symbols............................8 2 Warranty terms and exclusions......................9 3 Operating panel ..........................10 4 Program description .......................... 11 Lagoon programs........................11 General programs........................12 Automatic fan control .......................12 5 Handling ............................13...
User manual 1 Safety Precautions • Servicing shall be carried out only by authorized personnel. • Only authorized spare parts, accessories and consumables shall be used. • The machine is not to be used if industrial chemicals have been used for cleaning. •...
Page 6
User manual • Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can become hot enough to catch fire.
User manual 1.1 Additional safety precautions for gas heated tumble dryer • Before installation, check that the local distribution conditions, nature of gas and pres- sure and the adjustment of the appliance are compatible. • The machine is not to be installed in rooms containing cleaning machines with per- chloroethylene, TRICHLOROETHYLENE or CHLOROFLUOROCONTAINING HY- DROCARBONS as cleaning agents.
User manual In case several machines are managed by the same operator the repetitive movements will increase and as a conse- quence of this the related biomechanical risk will increase exponentially. The possible postural risks are the interaction with the user interface, display and buttons. Follow the below recommendations to avoid, as much as possible, operators acquiring bodily injury.
Warranty will be applicable where the customer has used only genuine spare parts and has performed maintenance in accordance with Electrolux Professional user and maintenance documentation made available in paper or elec- tronic format. Electrolux Professional strongly recommends using Electrolux Professional approved cleaning, rinse and descaling agents to obtain optimal results and maintain product efficiency over time.
User manual 3 Operating panel fig.X00727 Display Up- and down arrows that are used to scroll up and down through the menus on the display. Start- and pause button...
User manual 4 Program description There are two types of programs, automatic programs and time programs. Automatic programs has moisture detection and will stop when selected dryness is achieved. Time programs has no moisture detection and will stop when the preset or selected time has ended. 4.1 Lagoon programs The following table shows some examples of available programs and a short description of those: Automatic programs...
User manual 4.2 General programs The following table shows some examples of available programs and a short description of those: Hidden programs Description COTTON Denim and terry. EXTRA DRY The program will stop when set dryness is achieved. COTTON Cotton and terry. CARE The program will stop when set dryness is achieved.
User manual 5 Handling 5.1 Load Note! Remove all objects from pockets and make sure there are no metal objects such as screws, pins etc. left. Metal objects might cause damage to the drum. Make sure the filter is clean. fig.X00725A...
User manual Load the goods into the machine and close the door. The recommended maximum load is 14.2 kg. fig.X00735 5.2 How to start the machine Automatic programs Select program with the up- and down arrows. Start the machine by pressing Time programs Select program with the up- and down arrows.
User manual End a program It is possible to end a program after start. Select END PROGRAM and activate. When pressing the program will be ended. Status Select STATUS MENU and activate. The status menu shows the status for inlet air temp, outlet air temp, RMC and if the heat is on or off in the machine. Change drum speed (only on machines with DCS) Select CHANGE DRUM SPEED and activate.
Page 16
User manual Clean the filter The filter must be cleaned after each drying cycle. fig.X00725A...
User manual 6 Error codes A fault in the program or in the machine is indicated by an error code on the display. Some of these error codes can be solved easily without contacting service personnel. Error Text Cause/Action code 12:11 DRYING ERROR WITH RMC The RMC system (Residual moisture system) in the machine indicates that the garment is not...
User manual 7.3 Every day Check that the machine stops if the door or the filter drawer is opened, if so, the machine must be placed out of order until repairs are made. Clean the door, door glass, door gasket and other external parts. fig.X00726 Clean the filter and filter drawer.
User manual 7.4 Machines with heat pump 7.4.1 Second lint filter There are two warning messages indicating that the second filter shall be cleaned: 1. “CLEAN FIRST AND SECOND FILTER.” 2. “CLEAN FIRST AND SECOND FILTER. IF NOTICE REMAINS, CONTACT RESPONSIBLE FOR CHANGING THE SPECIAL FILTER.”...
User manual 8 Disposal information 8.1 Disposal of appliance at end of life Before disposing of the machine, make sure to carefully check its physical condition, and in particular any parts of the structure that can give or break during scrapping. The machine’s parts must be disposed of in a differentiated way, according to their different characteristics (e.g.
Page 24
Electrolux Professional AB 341 80 Ljungby, Sweden www.electroluxprofessional.com...