ADEMCO Vista-20 User Manual page 38

QUICK GUIDE TO
SYSTEM FUNCTIONS
FUNCTION
Check Zones
Arm System
Disarm System
Bypass zones
Quick Bypass
Chime Mode OF
Chime Mode OFf
Test Mode ON
Test
Mode OFF
PROCEDURE
Press [*]
Enter code
Press arming key desired
(AWAY,
STAY, INSTANT,
MAXIMUM)
Entercode
PressOFF [11
Enter code
Press BYPASS [6]
Enter zone numbers to be
bypassed (use 2-digit entries)
Enter code
Press BYPASS [61 and stoD
Enter code
Press CHIME [9]
Enter code
Press CHIME [9]
Enter code
Press TEST [5]
Enter code
Press OFF [1]
COMMENTS
Do this to view faulted zones when system not ready.
Do this to arm the system in the mode selected.
Do this to disarm the system and silences alarms.
Do this to bypass protection zones. Bypassed zones are un-
protected and will not cause an alarm if violated.
Do this to bypass all faulted zones automatically, if programmed.
Do this to
turn on chime
mode. Keypad will sound if doors or
windows are violated while system disarmed.
Do this to turn chime mode off.
Do this to enter test mode. Sounds alarm sounder and allows
sensors to be tested.
Do this to turn test mode off. System returns to normal mode.
-38-