ADEMCO Vista-20 User Manual page 14

CHECKING FOR OPEN ZONES
Using the
Before arming your system, all protected doors, windows and other protection zones
READY Key
must be closed or bypassed (see BYPASSING section), Otherwise the keypad will
display a "Not Ready" message, Using the READY key will display all zones that are
faulted, making it easier for you to secure any open zones.
To show faulted zones:
-
Note: A green READY indicator (if present) on the keypad will be lit
if the system is ready to be armed. If not lit, the system is not ready.
READY
1"
PRESS THE READY KEY
Do not enter security code, but
simply press the
READY key.
2"E!EEEZI
SECURE FAULTED
ZONES
Typical fault display shows open zones. Secure or
bypass the zones displayed before arming the system.
3"EZEEI
SYSTEM CAN
BE ARMED
The "Ready" message will be displayed when all pro-
tection zones have been either closed or bypassed.
You may now arm the system as usual.
-14-