To Delete A User - ADEMCO Vista-20 User Manual

SECURITY CODES
To Add a User or Important: Temporary users of the system (e.g., babysitters, cleaning staff, etc.)
Change a User's
should not be shown how to use any system function they do not need to know, such
Code
as bypassing protection zones for example.
Sequential key depressions for all steps in a procedure must be made within 2
seconds of one another, or else the entire entry is aborted and must be repeated from
its beginning (e.g., perform steps 1, 2, and 3 below with no delay between steps).
CODE
1" lnclcl+m
(Master Code)
2"UCI
(User Number)
3"
clcm
(User's Code)
CODE
To Delete a User
1" lnnn+m
(Master Code)
2"00
(User Number)
3.
-----------
ENTER MASTER
CODE THEN PRESS CODE KEY
Example: ~ PI ~ [~] then press the CODE key.
ENTER USER NUMBER
Enter the 2-digit User Number (03-1 6) for the user you
are adding or changing.
ENTER USER'S
CODE
Enter the new 4-digit security code
for that user.
ENTER MASTER CODE THEN PRESS CODE KEY
Example: PI ~ PI ~] then pressthe CODE key.
ENTER USER NUMBER
Enter the 2-digit User Number (03-1 6) for the user
whose code you are deleting.
STOP
Wait (about 3 seconds)
before pressing any
automatically deleted.
-28–
until the keypad beeps once
other key.
The code is