Panic Keys - ADEMCO Vista-20 User Manual

PANIC KEYS
(FOR MANUALLY ACTIVATING SILENT AND/OR AUDIBLE ALARMS)
Using
Panic Keys
Your installer I
should note the
functions that are
are active in your
system. -
I
Types of Panic
Alarms
7 *
If
your system is
connected to an
alarm monitoring
com~anv.
Your system may have been programmed to use special keys to manually activate
panic functions. The functions that might be programmed are listed below. See your
installer for the function(s) that may have been programmed for your system.
Active Panic Functions
Keys Zone Function
1 and * 95
3
and # 96
* and # 99
A*
95
B*
99
c*
96
May not
be
present on
your keypad(s).
To use a paired key panic function, simply
press both keys of the assigned pair at the
same time. If your keypad has lettered keys for panic functions, press the designated
key and hold down for at least 2 seconds to activate the panic function.
A
silent emergency
sends an alarm signal
A
personal emergency alarm sends an
to the alarm monitoring company,* but there emergency message to the alarm monitoring
will be no audible alarms or visual displays. company* and sounds at keypads, but not at
An audible emergency sends an
external sounders. (ALARM plus a zone
emergency message to the alarm monitoring
number is also displayed)
company* and sounds a loud, steady alarm
A fire alarm sends a fire alarm message to
at your keypad and at any external sounders
the alarm monitoring company* and uniquely
that may be connected (ALARM plus a zone
activates keypad and any external sounders
number is also displayed).
(FIRE plus a zone number is also displayed).
-24-