Disarming And Silencing Alarms; Memory Of Alarm - ADEMCO Vista-20 User Manual

DISARMING AND SILENCING ALARMS
(Continued)
Memory of Alarm
If an alarm occurs, the keypad displays the zone number (s) that caused the alarm and
the type of alarm. These messages remain displayed until cleared by a user.
To clear the display, note the zone number displayed and enter an OFF sequence
(enter your security code and press the OFF key).
If the
'Ready" message will not display, go to the displayed zone and correct the fault
(close windows, etc.). If the fault cannot be corrected, notify your alarm company.
-20-