Bypassing Protection Zones; Quick Bypass; Displaying Bypassed Zones - ADEMCO Vista-20 User Manual

Quick Bypass
BYPASSING PROTECTION ZONES (Continued)
Displaying
Bypassed Zones
Your system may allow you to easily bypass all open (faulted) zones without having to
enter zone numbers individually. Ask your installer if this feature is active.
BYPASS
1"
mtl+m
(Security Code)
TEE&&&d
Typical bypass message
Pa
3- D15RR17ED BYPRS5
ENTER SECURITY CODE THEN PRESS BYPASS
Example: ~ ~\ PI ~] then press the BYPASS key.
WAIT
[n a few moments, all open zones will be displayed
along with the word BYPASS. Wait for these zones to
be displayed before arming. Arming the system before
zones are displayed eliminates all bypasses.
ARM AS USUAL
Arm the system as usual when the keypad displays the
"Ready" message.
For determining what zones have been previously bypassed. Bypassed zones can be
displayed only when the system is disarmed, and when the "Bypass" message shown
in step 3 above is displayed.
BYPASS
1" mucl+m
ENTER SECURITY CODE THEN PRESS BYPASS
(Security Code)
Example: PI PI ~ then press the BYPASS key.
2-- 'A'T
In a few moments, all open zones will be sequentially
Typical bypass message
displayed along with the word BYPASS.
-22-