Bypassing Protection Zones; Using The~Bypass Key - ADEMCO security system User Manual

BYPASSING PROTECTION ZONES
Using the
BYPASS Key
1
LIMITATION ~
The system will not
allow fire zones to be
bypassed.
H
All bypasses are
removed when an OFF
sequence (security code
plus OFF) is performed.
THESE KEYS NOT PRESENT
This key is used when you want to arm your system with
intentionally unprotected. The system must be disarmed first.
1. Enter your security code and press the BYPASS key
one or more zones
2. Enter zone number(s) for the zone(s) to be bypassed (e.g., 06, 10, 13, etc.).
Single djgjt zone numbers must be preceded by a zero (e.g. 05, 06).
3. When finished, the console will display a "Bypass" message along with each by-
passed zone number. Wait for these zones to be displayed, to confirm their
bypass.
4. Arm the system as usual.
Bypassed zones are unprotected and will not cause an alarm If violated while
your system is armed.
TYPICAL DISPLAYS
TYPICAL CONSOLE KEYPAD
ALPHA DISPLAY
l-% l% l-% la W:::.:*NES:
d'
h I?5 m ~" ~:~ 'YPASS
FIXED-WORD DISPLAY
fi l.;., , c: ,
,C~l ::;;:EN=-
BYPASSED ZONES
Q QQP
TO BE DISPLAYED
BEFORE ARMING
ON ALL CONSOLES ~
-14-