Table of Contents
Advertisement
BYPASSING PROTECTION ZONES
Using the
6
This key is used when you want to arm your system with one or more zones intentionally
unprotected. Bypassed zones are unprotected and will not cause an alarm when violated while
BYPASS Key
your system is armed. All bypasses are removed when an OFF sequence (security code
plus OFF) is performed. Bypasses are also removed if the arming procedure that follows the
bypass command is not successful.
The system will not allow fire zones to be bypassed.
To bypass zones, the system must be disarmed first.
1.
(Security Code)
2.
(Zone Numbers)
3.
BYPASS 07 F RONT
UPST AIRS BE DROOM
Typical bypass message
4.
DISARME D BYPASS
BYPASS
+
6
ENTER SECURITY CODE THEN PRESS BYPASS
Example: 7
ENTER ZONE NUMBERS
Enter the zone number(s) for the zones to be bypassed
(e.g., 01, 02, 03, etc.).
Important! All single-digit numbers must be preceded by a
zero (for example, enter 01 for zone 1).
WAIT
The keypad will display the word BYPASS along with each
bypassed zone number. Wait for these zones to be
displayed, to be sure that intended zones are bypassed.
ARM AS USUAL
Arm the system as usual when the keypad displays the
RE ADY T O ARM
"Ready " message.
– 19 –
2
9
6
then press the BYPASS key.
(Continued)
Advertisement
Table of Contents
