Disassembling Of The Door Handle; Removal Of The Doors - Electrolux DF36 Service Manual

2.6 Disassembling of the Door Handle

2.6.1 With the help of a screwdriver, remove the handle cover applying pressure from below so as not to scratch
the surface. Pull the cover to the front, releasing it.
2.6.2 With the help of a Torx T30 tool, remove the screw and release the handle pulling it to the left to release the
lock, and then to the front.
2.6.3 To assemble the door handle, please follow the same sequence previously described backwards.
Note: whenever necessary to replace the handle, it's also recommended to replace the handle cover since it can
be damaged during the removal.

2.7 Removal of the Doors

2.7.1 Using a 1/4 x 6" Phillips screwdriver, loosen the two screws of the top hinge, and then lift the front part of the
hinge so as to unfit it.
2.7.2 Carefully remove the freezer door, lifting and
unfitting it from the intermediary hinge. Be careful
not to lose the support plastic washer.
This document cannot be reproduced or passed to third parties without authorization of Electrolux do Brasil S.A.
2.7.3 Using a T30 Torx tool, remove the intermediary
hinge loosening its screws.
2.7.4 Remove the refrigerator door, lifting it and unfitting
it from the bottom hinge.
8