Tools And Equipment Required For The Product Maintenance; Access To The Freezer Components - Electrolux DF36 Service Manual

1. TOOLS AND EQUIPMENT REQUIRED FOR THE PRODUCT MAINTENANCE

• Digital multimeter plier (Minipa ET 3200 A)
• Curved-noose plier
• Pipe-cutting plier (LRSZ –VULCAN))
• Cutting plier
• Lokring plier (VULCAN)
• Lockring joints 8 to 6, aluminum - copper
• Screwdriver 1/4 x 6"
• Phillips screwdriver 3/16 x 6"
• Torx tools set
• Digital Multimeter
• Thermal-hygrometer (SUNDO)
• Digital Thermometer with 4 sensors (Full Gauge)
• Lokprep sealant
2. PRODUCT DISASSEMBLING

2.1 Access to the Freezer Components

2.1.1 Remove all the freezer accessories.
2.1.3 Remove the top flow assemblage by pulling it
from the top.
This document cannot be reproduced or passed to third parties without authorization of Electrolux do Brasil S.A.
2.1.2 With a Phillips screwdriver, remove the top flow
screws.
2.1.4 With a Phillips screwdriver, remove the two
screws so as to loose the cover.
3