Electrolux DF36 Service Manual page 21

2.9.10 To remove the Reflecting Gutter:
• Unplug the connectors of the fuse-bimetal circuit and the resistance.
• Pull the evaporator locks to release the reflecting gutter.
2.9.11 To replace the fuse-bimetal circuit:
• Carefully turn the evaporator from the right to the left, • Using a cutting pliers, remove the four plastic fasteners
as shown in the picture bellow. that fix the fuse-bimetal circuit to the evaporator.
INSTALL THE NEW FUSE-BIMETAL CIRCUIT TAKING CARE TO POSITION IT THE SAME
WAY THE ORIGINAL CIRCUIT WAS POSITIONED. FIX THE NEW CIRCUIT WITH PLASTIC
FASTENERS CUTTING OFF THE EXCESS.
This document cannot be reproduced or passed to third parties without authorization of Electrolux do Brasil S.A.
11