Installing Door Handles; Door Handle - Electrolux French Door Bottom Freezer/Refrigerator Use & Care Manual

12

Installing Door Handles

Door Handle

Mounting
Instructions
1 Remove handles from
protective packaging.
2 Position fresh food handle
end caps (A) over upper
and lower pre-installed
shoulder bolts (B) that
are fastened into door,
ensuring the holes for
the set screws are facing
towards the opposite door.
3 While holding handle firmly
against door, fasten upper
and lower Allen set screws
(C) with supplied Allen
wrench.
4 Repeat steps 2 and 3 to
install opposite handle.
Ensure the holes for the
set screws are facing
towards the first door.
5 Position freezer handle
end caps over left and right
pre-installed shoulder bolts
that are fastened to the
door, ensuring the holes for
the set screws are facing
down.
6 While holding handle firmly
against door, fasten left
and right Allen set screws
(C) with supplied Allen
wrench.
NOTE
To ensure that handles are flush with door, make sure that set screws are completely tightened.
Mounting Refrigerator Handles
Mounting Freezer Handle