Access To The Refrigerator Components - Electrolux DF36 Service Manual

Module i
Hide thumbs Also See for DF36:
Table of Contents

Advertisement

2.1.5 Pull the cover as shown in the image below and
disconnect the motofan.
Note.: The removal of this cover can be hindered if
the product is cold since then the ice can stuck
it to the evaporator. Await a few minutes to
remove the cover.
2.1.7 To assemble the components above just follow the assembling sequence backwards, with special care in
relation to:
- the proper positioning of the components,
- the correct connection of the electrical terminals.

2.2 Access to the Refrigerator Components

Remove the refrigerator compartment shelves, pulling them to the front until they stop. Raise them and pull
them out.
This document cannot be reproduced or passed to third parties without authorization of Electrolux do Brasil S.A.
2.1.6 Disconnect the motofan thermostat – it has a
locking connector that should be pressed so as to
be released.
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents