Table of Contents
Advertisement
Installation
Where to Set It Up
Your telephone is made for normal usage conditions. Today's furniture is coated
with a sheer myriad of lacquers and plastics and treated with various lacquer care
products. It is possible that some of these materials contain components which
can attack and deteriorate the plastic feet of the charging station. The device feet
altered by these foreign substances may leave undesirable marks on furniture sur-
faces.
For understandable reasons, the manufacturer cannot assume liability for these
types of damage. This is why you should use an anti-slip mat under your charging
station – particularly with furniture that is new or has been freshened up with
lacquer care products.
Note
Please make sure you do not set up the charging station in the space where
doors or windows open: Damage Risk!
Power Supply / Power Supply Unit
The power supply unit is suitable for 100V to 240V alternating current (50-60 Hz). It
comes with 4 interchangeable adapters so it can be used practically anywhere
worldwide. As needed, put the connector on the power supply used in your
country. Mounting varies slightly as there are two variants of the power supply
connector:
Variant 1: Position the switch on the power supply at OPEN and slide the con-
nector in place upwards and off. Stick the desired new connector into the power
supply and lock it by positioning the switch at LOCK.
Variant 2: Remove the connector if one is there by pressing OPEN. Then place the
desired new connector into the power supply slightly diagonally with the TOP des-
ignation showing upwards. Press it down until it clicks into place.
When you wish to disconnect the charger from the power supply, pull the power
supply unit plug out of the mains socket. If there is a power outage, all memory
data (programme and user data) are saved on the mobile unit without alteration.
Micro SD Card
Aastra 620d, 630d: Under the mobile unit battery there is a recess for inserting a
micro SD card. In the current scope of delivery this has no function and will serve
future applications. When inserting batteries, be careful not to damage the
insertion recess.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
11
Advertisement
Table of Contents
