Table of Contents
Advertisement
Telephoning
Ending a Call
If the subscriber you are speaking to ends the call, the busy signal for your tele-
phone is switched off after a few seconds and you can be reached again. This also
applies when you are connected via headset. The time interval until the busy
signal is switched off is configured by the system administrator. All other connec-
tions are ended after 20 seconds when the receiver is not replaced.
Accepting Calls
When there is an incoming call, an event window with information on the call
appears on the display and the display illumination is switched on.
... or
optional:
... or
Reject /
... or
Normal call
When you are called, the caller's call number is displayed (if transmitted). If this call
number is also recorded in your phone book, you will see the person's name
instead.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Calls are ended by pressing the end key briefly.
Press the call key.
When Auto answer" is activated (see page 111) – remove the
mobile unit from the charging station
The ring tone and/or vibration alarm are switched off, you can,
however, still accept the call.
Press softkey (alternatively: end key) The call is rejected. The caller
hears the busy signal.
Press softkey briefly and select one of the menu entries offered,
please refer to Incoming Call Menu starting on page 61
59
Advertisement
Table of Contents
