Safety Symbols - JDS Uniphase BACKREFLECTION METER RM3750 User Manual

Safety Symbols

The following symbols and messages can be marked on the unit (Table 2). Observe all safety
instructions that are associated with a symbol.
Table 2: Safety Symbols
Symbol
Laser safety. See the user's manual for instructions on handling and operating
the unit safely.
See the user's manual for instructions on handling and operating the unit
safely.
Electrostatic discharge (ESD). See the user's manual for instructions on
handling and operating the unit safely.
Frame or chassis terminal for electrical grounding within the unit.
Protective conductor terminal for electrical grounding to the earth.
The procedure can result in serious injury or loss of life if not carried out
WARNING
in proper compliance with all safety instructions. Ensure that all
conditions necessary for safe handling and operation are met before
proceeding.
The procedure can result in serious damage to or destruction of the unit if not
CAUTION
carried out in compliance with all instructions for proper use. Ensure that all
conditions necessary for safe handling and operation are met before
proceeding.
10112341 Rev 002
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
RM3 SERIES BACKREFLECTION METER
Description
USER'S MANUAL
Page 8 of 39