Automatic Switch-Off Function; Automatic Heating Function - Baumatic BF13.3 Instruction Manual

Automatic switch-off function

o Based on the power level, each cooking zone is shut off after a
maximum preset time if no buttons are pressed. Each time an
action is performed, such as pressing a button, the maximum
operation time is reset.
o The appliance can be switched off at any time by pressing the
power supply button (1) even if the safety lock is in use.

Automatic heating function

When the automatic heating function is activated, the power of the
cooking zone reaches 100% for an established heating time depending
on the power level set. This allows the cooking zone to heat to the full
capacity of the required power level in a much quicker time.
o To activate this function, set the power level of the chosen zone
to 9 and then press the plus button (3) again.
o Use the plus (3) and minus (4) buttons to select the desired
power level.
o Approximately 3 seconds after the power level is set, an "A"
symbol will appear on the cooking zone display alternating with
the chosen power level.
o If you press the minus button (4) during this time, the
automatic heating function will be cancelled.
o If you press the plus button (3) during this time, you can select
a higher cooking level and the duration for automatic heating will
change accordingly.
o When the automatic heating function is complete, the display will
show the selected power level and the cooking zone will be
working to the full capacity of that power level.
o For a general guide to the duration of automatic heating for the
different power levels please see the table below:
Power level Automatic heating time (seconds)
1
2
3
4
5
6
7
60
180
288
390
510
210
210
13