Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Baumatic BF25.1SS
Summary of Contents for Baumatic BF25.1SS
- Page 1 BF25.1SS 90 cm Front touch control ceramic hob...
- Page 2 User Manual for your Baumatic BF25.1SS 90 cm Front touch control 5 hyperspeed zone ceramic hob. NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference;...
-
Page 3: Table Of Contents
Unpacking the appliance Installing the appliance 25 – 26 Electrical connection Connecting the mains supply cable 27 – 28 Replacing the mains supply cable 28 - 29 My appliance isn’t working correctly 29 – 30 Baumatic Ltd. Conditions of Guarantee Contact details... -
Page 4: Environmental Note
Environmental note o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the environment. -
Page 5: Important Safety Information
You should not use this appliance to store items on or as a work surface. o No modifications to the appliance are permitted by Baumatic Ltd. o You should not store or place flammable or highly flammable liquids/materials on top of or near the appliance. Items made from aluminium, plastic or plastic film should also be kept away from the appliance, as they may fuse to the surface. - Page 6 Child Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch the appliance at any time. During and after use, all surfaces will become hot. o If it is necessary for younger family members to be in the kitchen, please ensure that they are kept under close supervision at all times.
- Page 7 Please see the specific section of this booklet that refers to installation. o Baumatic Ltd. declines any responsibility for injury or damage, to person or property, as a result of improper use or installation of this appliance.
-
Page 8: Specifications
o Pans should be lifted on and off the hob surface and not dragged. o Cooking zones should not be switched on without cookware placed on them. Also the cookware should not be empty. Specifications Product dimensions: Aperture dimensions: Height: 510 mm Height: 490 mm... -
Page 9: Electrical Details
Electrical details Rated Voltage: 230 Vac 50 Hz Supply Connection: 30 A (double pole switched fused outlet with 3mm contact gap) Max Rated Inputs: 8.9 kW Mains Supply Lead: 3 core x 6 mm² (not supplied) For future reference please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice. -
Page 10: Ceramic Hob Surface Layout
Ceramic hob surface layout Control panel layout ON/OFF button Safety lock button Safety lock neon Minus button Plus button Cooking zone indicator Decimal point symbol Double hyperspeed zone ON/OFF button Dual circuit indicator neon Triple hyperspeed zone ON/OFF button Triple circuit indicator neon Timer ON/OFF button Timer minus button Timer plus button... -
Page 11: Cooking Zone Indicators And Neon's
Cooking zone controls and indicators Using the ceramic hob Before first use IMPORTANT: You should clean the ceramic hob surface (see “Cleaning and maintenance” section). o An “H” may appear in the cooking zone indicators when the appliance is connected to the power supply for the first time. o You should switch on one cooking zone at a time, for 5 minutes at the maximum setting. -
Page 12: Turning The Hob On
Turning the hob on o Press the ON/OFF button (1) o The cooking zone indicators (6) will all read “0”. o The decimal point symbols (7) will flash on and off. Turning on a zone and setting a power level IMPORTANT: A zone must be selected within 10 seconds of turning the hob on. -
Page 13: Turning On The Double Hyperspeed Zone
Turning on the double hyperspeed zone The double hyperspeed zone has two cooking areas that you can use, a central section and an outer section. You can use the central section (A) independently or both sections (B) at once. o Press the minus button (4) for the double hyperspeed zone. o Adjust the zone between power levels 1 and 9, using the plus (5) and minus (4) buttons. -
Page 14: Turning On The Triple Hyperspeed Zone
Turning on the triple hyperspeed zone The triple hyperspeed zone has three cooking areas that you can use, a central section, an inner section and an outer section. You can use the central section, the central and inner section or all three sections at once. -
Page 15: Turning Off A Zone Gradually
Turning off a zone gradually o Press the minus button (4) of the zone that you want to switch off, until the number in the cooking zone indicator reaches “0”. After 3 seconds, the zone will switch off automatically. Turning off a zone instantly o Press the minus button (4) and the plus button (5) simultaneously. -
Page 16: Residual Heat Indicator
Residual heat indicator o After a zone is switched off, the corresponding cooking zone indicator (6) will show the letter “H”. This means that the temperature of the zone is over 60°C and is therefore high enough to cause injury. o If you switch off the appliance using the ON/OFF button (1) then the “H”... -
Page 17: Safety Cut-Off
Safety cut-off o If one or more of the cooking zones are accidentally left on, a safety cut off will activate after a certain period of time. The length of time depends on the power level that a zone or zones have been set on. -
Page 18: Increasing The Power Level During Automatic Pre-Heating
o When the minus button (4) is released, the decimal point will stop flashing and the power level that you have selected will appear on the cooking zone indicator (6). o Once the automatic pre-heating time period is over, the hob will beep once and the decimal point symbol will go out. -
Page 19: Switching Off Automatic Pre-Heating
Switching off automatic pre-heating o If a zone is already within automatic pre-heating mode and you wish to cancel it. o Press the minus button (4) to activate the zone. The decimal point symbol (7) will come on. o Press the minus button (4) again and the automatic pre-heating mode will then be cancelled and you can use the hob in normal operation once more. -
Page 20: The Hob Timer (Switching A Zone Off)
o At the end of the time period, an acoustic signal will sound that lasts for 10 seconds. o To cancel the acoustic signal, press the timer ON/OFF button (12). The hob timer (switching a zone off) o Select the hob zone that you wish to use and set the required power level. -
Page 21: Hob Guidelines
o If you wish to cancel the timer setting before it reaches the end of the countdown period, press the plus (14) and minus (13) buttons of the timer simultaneously. o IMPORTANT: If you cancel the timer setting, the selected zone will still remain on, therefore you will need to turn the zone off manually. -
Page 22: Cleaning And Maintenance
Especially if pointed or hard objects are allowed to fall on it with some force. o DO NOT USE THE HOB IF THE SURFACE BECOMES BROKEN OR CRACKED. YOU SHOULD CONTACT THE BAUMATIC SERVICE DEPARTMENT IMMEDIATELY. Cleaning and maintenance Cleaning operations must only be carried out when the hob is cool. -
Page 23: Cleaning Table
Cleaning table Type of deposit Remove Remove What should I immediately? when the use to remove appliance the deposit? has cooled down? Sugar or Ceramic hob food/liquid scraper containing sugar Tin foil or plastic Ceramic hob scraper Fat splashes Ceramic hob cleaner Metallic Ceramic hob... -
Page 24: Installation
When unpacking the appliance please check that the following items are contained within the packaging: 1 Baumatic hob 1 Ceramic hob scraper 1 Installation and instruction manual 1 Baumatic guarantee card 4 Fixing brackets 4 Fixing screws 4 Spring clips 1 Sealing strip... -
Page 25: Installing The Appliance
Installing the appliance o Cut a hole in the worktop that corresponds with the drawings shown above. o IMPORTANT: You must have a gap of at least 25 mm between the underneath of the appliance and any surface that is below it. o Carefully turn the hob upside down and place it on a cushioned mat. - Page 26 Clip Fixing bracket Screw o You should insert a clip (A) into the holes which are located in each corner of the hob. o Place the fixing brackets (B) over each hole and clip, and then place a screw (C) through the hole and fixing bracket (B). Tighten the screws a little way, so that they stay in place.
-
Page 27: Electrical Connection
Electrical connection This appliance must be installed by a qualified person in accordance with the latest edition of the I.E.E. Regulations and in compliance with Baumatic’s instructions. Before connecting the appliance, make sure that the supply voltage marked on the rating plate corresponds with your mains supply voltage. -
Page 28: Replacing The Mains Supply Cable
This should be done before contacting the Baumatic Service Department. o IMPORTANT: The appliance must NOT be connected to the mains supply by means of a 13A plug and socket. -
Page 29: My Appliance Isn't Working Correctly
* IMPORTANT: If the cooking zone does appear to be hotter than 60°C and the residual heat indicator has not come on, you should call the Baumatic Service Department. o A humming sound is heard when a cooking zone is selected. - Page 30 Or any installation other than the one specified by Baumatic Ltd. has been completed. Please refer to the conditions of guarantee document on page 31 of...
-
Page 31: Baumatic Ltd. Conditions Of Guarantee
Baumatic appliance. * In addition, your appliance is covered by a 5 year parts warranty. Baumatic Ltd will provide free of charge the parts required to repair the appliance, only if they are fitted by a Baumatic engineer, for any defect that arises due to faulty materials or workmanship within a period of 5 years from the original purchase date. -
Page 32: Contact Details
Headquarters Baumatic Ltd. Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX, United Kingdom Sales Telephone +44 118 933 6900 Sales Fax +44 118 931 0035 Service Telephone +44 118 933 6911 Service Fax +44 118 986 9124 Spares Telephone...
Need help?
Do you have a question about the BF25.1SS and is the answer not in the manual?
Questions and answers