Unpacking The Appliance; Installing The Appliance - Baumatic BF13.3 Instruction Manual

o 55 mm clearance between the back of the hob surface and the
wall behind it.
o If the hob is positioned so that the right or left hand side of the
appliance will be near to the edge of a kitchen unit. There must
be a gap of at least 150 mm between the side of the hob and the
vertical surface of the kitchen unit.

Unpacking the appliance

When unpacking the appliance please check that the following items
are contained within the packaging:-
1 Baumatic hob
1 Ceramic hob scraper
1 Installation and instruction manual
1 Baumatic guarantee card
4 Fixing brackets
4 Fixing screws
1 Sealing strip

Installing the appliance

o Cut a hole in the worktop that corresponds with the drawing
shown above.
o If the hob is being installed without an oven below it, a
separator panel must be placed between the bottom of the hob
and the housing below it, at a minimum distance of 10 mm.
o If the hob is being installed with an oven below it, place a
separator panel at a minimum distance of 15 mm and follow the
18