Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Baumatic BF15.1SS
Summary of Contents for Baumatic BF15.1SS
- Page 1 BF15.1SS 60cm Front touch control ceramic hob...
- Page 2 User Manual for your Baumatic BF15.1SS 60 cm Front touch control 4 hyperspeed zone ceramic hob. NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference;...
-
Page 3: Table Of Contents
Unpacking the appliance Installing the appliance 23 – 24 Electrical connection Connecting the mains supply cable 25 – 26 Replacing the mains supply cable 26 - 27 My appliance isn’t working correctly 27 – 28 Baumatic Ltd. Conditions of Guarantee Contact details... -
Page 4: Environmental Note
Environmental note o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the environment. -
Page 5: Important Safety Information
You should not use this appliance to store items on or as a work surface. o No modifications to the appliance are permitted by Baumatic Ltd. o You should not store or place flammable or highly flammable liquids/materials on top of or near the appliance. Items made from aluminium, plastic or plastic film should also be kept away from the appliance, as they may fuse to the surface. - Page 6 Child Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch the appliance at any time. During and after use, all surfaces will become hot. o If it is necessary for younger family members to be in the kitchen, please ensure that they are kept under close supervision at all times.
- Page 7 Please see the specific section of this booklet that refers to installation. o Baumatic Ltd. declines any responsibility for injury or damage, to person or property, as a result of improper use or installation of this appliance.
-
Page 8: Specifications
o Pans should be lifted on and off the hob surface and not dragged. o Cooking zones should not be switched on without cookware placed on it. Also the cookware should not be empty. Specifications Product dimensions: Aperture dimensions: Height: 510 mm Height: 490 mm... - Page 9 Electrical details Rated Voltage: 230 Vac 50 Hz Supply Connection: 30 A (double pole switched fused outlet with 3mm contact gap) Max Rated Inputs: 6.6 kW Mains Supply Lead: 3 core x 6 mm² (not supplied) For future reference please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice.
-
Page 10: Ceramic Hob Surface Layout
Ceramic hob surface layout Control panel layout ON/OFF button Safety lock button Safety lock neon Plus button Minus button Cooking zone indicator Decimal point symbol Oval hyperspeed zone dual circuit ON/OFF button Oval hyperspeed zone dual circuit indicator neon Timer plus button Timer minus button Timer display Double hyperspeed zone dual circuit ON/OFF button... -
Page 11: Cooking Zone Indicators And Neon's
Cooking zone indicators and neon’s Using the ceramic hob Before first use IMPORTANT: You should clean the ceramic hob surface (see “Cleaning and maintenance” section). o You should switch on one cooking zone at a time, for 5 minutes at the maximum setting. This will help to eliminate any new smell that exists and evaporate any humidity that has formed on the heating elements during transit. -
Page 12: Turning The Hob On
Turning the hob on o When your mains supply is turned on, the safety lock will be switched on and the safety lock neon (3) will be lit. Press the safety lock button (2) and the safety lock will be turned off and the safety lock neon (3) will go out. -
Page 13: Turning Off A Dual Circuit's Outer Section
o Adjust the oval hyperspeed or double hyperspeed zone between power levels 1 and 9, using the plus (4) and minus (5) buttons. o The central section is switched on. o If you wish to also activate the outer section of the oval hyperspeed zone, you should press the oval hyperspeed zone dual circuit ON/OFF button (8). -
Page 14: Turning Off A Zone Instantly
Turning off a zone instantly o Press the minus button (5) and the plus button (4) simultaneously. o The zone will switch off immediately. o An “H” will show in the cooking zone indicator (6), alternating with “0”. (See the section on the “residual heat indicator”... -
Page 15: Locking The Hob Top
Locking the hob top o The whole hob top can be locked by pressing the safety lock button (2) whilst the appliance is turned on. o The safety lock neon (3) will light to show that the safety lock feature has been switched on. -
Page 16: Automatic Pre-Heating
Automatic pre-heating o This feature will set a cooking zone to maximum power and will then automatically set the cooking zone to a power level that you have selected after a certain period of time. o Press the minus button (5) once and power level 9 appears on the cooking zone indicator (6), then release the minus... -
Page 17: Increasing The Power Level During Automatic Pre-Heating
Increasing the power level during automatic pre-heating o If a zone is already within automatic pre- heating mode and you wish to adjust the power level. o Increase the power level by pressing the plus button (4). o The pre-heating time will be adjusted. It will take into account the amount of time that has already elapsed. -
Page 18: Hob Guidelines
o After selecting the timer, a zone must be selected within 10 seconds by pressing one of the plus (4) or minus (5) buttons. You should use these buttons to select your desired power level. o The zone will switch on and start to heat, a light (13) will switch on next to the relevant cooking zone indicator (6). - Page 19 Especially if pointed or hard objects are allowed to fall on it with some force. o DO NOT USE THE HOB IF THE SURFACE BECOMES BROKEN OR CRACKED. YOU SHOULD CONTACT THE BAUMATIC SERVICE DEPARTMENT IMMEDIATELY.
-
Page 20: Cleaning And Maintenance
Cleaning and maintenance Cleaning operations must only be carried out when the oven is cool. The appliance should be disconnected from your mains supply before commencing any cleaning process. Cleaning the ceramic hob top Any residues that are left on the hob top surface from cleaning agents will damage it. -
Page 21: Using A Ceramic Hob Scraper
Using a ceramic hob scraper Your appliance will be provided with your appliance. The following guidelines should also be followed when using the ceramic hob scraper:- o The scraper should be placed on the ceramic surface at an angle. o Residues should be removed by sliding the blade carefully over the ceramic surface. -
Page 22: Installation
When unpacking the appliance please check that the following items are contained within the packaging: 1 Baumatic hob 1 Ceramic hob scraper 1 Installation and instruction manual 1 Baumatic guarantee card 4 Fixing brackets 4 Fixing screws 4 Spring clips 1 Sealing strip... -
Page 23: Installing The Appliance
Installing the appliance o Cut a hole in the worktop that corresponds with the drawings shown above. o IMPORTANT: You must have a gap of at least 25 mm between the underneath of the appliance and any surface that is below it. o Carefully turn the hob upside down and place it on a cushioned mat. - Page 24 Clip Fixing bracket Screw o You should insert a clip (A) into the holes which are located in each corner of the hob. o Place the fixing brackets (B) over each hole and clip, and then place a screw (C) through the hole and fixing bracket (B). Tighten the screws a little way, so that they stay in place.
-
Page 25: Electrical Connection
Electrical connection This appliance must be installed by a qualified person in accordance with the latest edition of the I.E.E. Regulations and in compliance with Baumatic’s instructions. Before connecting the appliance, make sure that the supply voltage marked on the rating plate corresponds with your mains supply voltage. -
Page 26: Replacing The Mains Supply Cable
Replacing the mains supply cable If the mains supply cable is damaged, then it must be replaced by an appropriate replacement which can be obtained from the Baumatic Spares Department. The mains supply cable should be replaced in accordance with the following instructions: o Switch the appliance off at the control switch. -
Page 27: My Appliance Isn't Working Correctly
* IMPORTANT: If the cooking zone does appear to be hotter than 60°C and the residual heat indicator has not come on, you should call the Baumatic Service Department. o A humming sound is heard when a cooking zone is selected. - Page 28 Or any installation other than the one specified by Baumatic Ltd. has been completed. Please refer to the conditions of guarantee document on page 29 of...
-
Page 29: Baumatic Ltd. Conditions Of Guarantee
Baumatic appliance. * In addition, your appliance is covered by a 5 year parts warranty. Baumatic Ltd will provide free of charge the parts required to repair the appliance, only if they are fitted by a Baumatic engineer, for any defect that arises due to faulty materials or workmanship within a period of 5 years from the original purchase date. -
Page 30: Contact Details
Headquarters Baumatic Ltd. Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX, United Kingdom Sales Telephone +44 118 933 6900 Sales Fax +44 118 931 0035 Service Telephone +44 118 933 6911 Service Fax +44 118 986 9124 Spares Telephone...