Table of Contents
Advertisement
o Remember, a cooking zone will turn off automatically after a
certain time when a cooking level is set but there is no pot put
on it.
o Turn the hob off through its proper device after use. Do not rely
only on pot detection.
Automatic pre-heating
o This feature will set a cooking zone to maximum power and will
then automatically set the cooking zone to a power level that
you have selected after a certain period of time.
o Use the minus button (4) to select power level 9, and then use
the plus button (3) to select power level 9. An "A" symbol will
appear in the cooking zone indicator (8).
o Press the minus button (4) until the cooking zone indicator (8)
shows the desired power level, then release the minus button.
o When the minus button (4) is released, the power level that you
have selected will appear on the cooking zone indicator (8),
alternating with the symbol "A".
o Once the automatic pre-heating time period is over, the hob will
beep once and only the actual power level will show on the
cooking zone indicator (8).
o The period of time that a zone will automatically pre-heat for
before dropping to the actual power level, is shown in the table
below:-
Increasing the power level during automatic pre-heating
o If a zone is already within automatic pre-heating mode, you can
adjust the power level.
LEVEL TIME LIMIT
1
40 seconds
2
1 minute 12 seconds
3
2 minutes
4
2 minutes 56 seconds
5
4 minutes 16 seconds
6
7 minutes 12 seconds
7
2 minutes
8
3 minutes 12 seconds
9
N/A
16
Advertisement
Table of Contents
