Page 2
User Manual for your Baumatic BHC300 30 cm Domino ceramic hob with knob control operation NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference;...
Environmental note o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the environment.
No modifications to the appliance are permitted by Baumatic Ltd. o You should not store or place flammable or highly flammable liquids/materials on top of or near the appliance. Items made...
Page 6
Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch the applian ce at any time. During and after use, all surfaces will be hot. o If it is necessary for younger family members to be in the...
Page 7
Please see the specific section of this booklet that refers to stallation. o Baumatic Ltd. declines any responsibility for injury or damage, to person or property, as a result of improper use or installation of this appliance.
o Pans should be lifted on and off the hob surface and not dragged. o Cooking zones should not be switched on without cookware placed on it. Also the cookware should not be empty. o Food or liquid that has high sugar content may damage the hob top if it comes into contact with the ceramic hob surface.
Electrical details Rated Voltage: 220-240, Vac 50-60 Hz Supply Connection: 20A (dou ble pole switched fused outlet with 3mm contact gap) ax Rated Inputs: 3.60 kW ains Supply Lead: 3 core x 1.5 mm² (not supplied) For future reference please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice.
eramic hob surfac e layout = 1.80 kW hyper -speed zone (Ø 200 mm) = 1.20 kW hyper-speed zone (Ø 165 mm) = Control knobs Using the cera mic hob Before first use MPORTANT: You should clean the ceramic hob surface (see “Cleaning and maintenance”...
Control knobs All operations are performed by means of the 2 control knobs that can be found at the front of the hob top. o The control knob should be turned clockwise to select a heating level. The markings around the outside of each control knob indicate the power level that you have set the zone to.
esidual heat indi cators o Next to of each control knob, there is a residual heat indicator. o After switc hing a cooking zone on, when the temperature of goes above 60°C the corresponding residual heat indicator neon will come on. o After switching a cooking zone off, the residual heat indicator neon will stay.
Page 13
o You should not use saucepans with rough bottoms, as this can scratch the cera mic surface. o Before use, make sure that the bottoms of the saucepans are clean and dry. o When cold, the bottom of the pans should be slightly concave, as they expand when hot and lie flat on the surface of the hob.
Cleaning and maintenance Cleaning operations must only be carried out when the hob is cool. The appliance should be disconnected from your mains supply before commencing any cleaning process. Clean ng the ceramic hob top Any residues that are left on the hob top surface from cleaning agents will damage it.
Using a ceramic hob scraper Your appli ance will be provided with a hob scraper. The following uidelines should also be followed when using the ceramic hob craper:- o The scraper should be placed on the ceramic surface at an angle. o Residues should be removed by sliding the blade carefully over the ceramic surface.
Unpacking the appliance hen unpacking the appliance please check that the following items are contained wit hin the packaging:- 1 Baumatic hob 1 Ceramic hob scraper 1 Installation and instruction manual 1 Baumatic guar antee card...
nstalling t he appliance o Cut a hole in the worktop that corresponds with the drawing shown above. o IMPORTANT: You must observ ventilation requirements shown in the drawing opposite.
Page 18
o IMPORTANT: There ventilation holes around the outside of the hob. YOU MUST ensure that these holes are not blocked by the work top, when you put the hob into position (see drawing opposite). o Carefully turn the hob upside down and place it on a cushioned mat.
Page 19
o Th e supplied brackets need to be fitted to each of the four corners on the underside of the hob. o Place a bracket onto each corner, ensuring that the outer hole lines up with the hole on the corner of the hob.
Electrical connection YOUR INTENDED FITTED PERMANENT INSTALLATION. o Cable type: H05 RRF 3 core x 1.50 mm³ (Type RR-F <HAR> marked). (Not supplied) o Before connecting the appliance, make sure that the supply voltage marked on the rating plate corresponds with your mains supply voltage.
* IMPORTANT: If the cooking zone does appear to be hotter than 60°C and the residual heat indicator has not come on, you should call the Baumatic Customer Care Department. o A humming sound is heard when a cooking zone is selected.
Page 22
Or any installation other than the one specified by Baumatic Ltd. has been completed. Please refer to the conditions of gu arantee that appear on the arranty card that you receive with the appliance.
BC005 Stainless Steel Cleaner and Protector (250 ml) o BC007 E-Cloth – General Purpose Cloth o BC008 Microwave Cover o order a Baumatic consumable product please call 0123 5437 244 nd quote the product code. You can also order online from shop.baumatic.co.uk...
Need help?
Do you have a question about the BHC300 and is the answer not in the manual?
Questions and answers