Sntp Settings; Time Settings - D-Link DES-3526 Manual

UDP Port (514 or
6000-65535)
Status
To set the System Log Server configuration, click Apply. To delete an entry from the System Log
Server window, click the corresponding X under the Delete heading of the entry you wish to delete.
To return to the Current System Log Servers window, click the

SNTP Settings

Time Settings

To configure the time settings for the Switch, open the Configuration folder, then the SNTP folder
and click on the Current Time Setting link, revealing the following window for the user to configure.
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
0 kernel messages
1 user-level messages
2 mail system
3 system daemons
4 security/authorization messages
5 messages generated internally by syslog line printer subsystem
7 network news subsystem
8 UUCP subsystem
9 clock daemon
10 security/authorization messages
11 FTP daemon
12 NTP subsystem
13 log audit
14 log alert
15 clock daemon
16 local use 0 (local0)
17 local use 1 (local1)
18 local use 2 (local2)
19 local use 3 (local3)
20 local use 4 (local4)
21 local use 5 (local5)
22 local use 6 (local6)
23 local use 7 (local7)
Type the UDP port number used for sending Syslog messages. The default is 0.
Choose Enabled or Disabled to activate or deactivate.
Show All System Log Servers
81
link.