Snmp Engine Id - D-Link DES-3526 Manual

The following parameters can set:
Parameter
Host IP Address
SNMP Version
Community String or
SNMP V3 User Name
To implement your new settings, click Apply. To return to the SNMP Host Table, click the
SNMP Host Table Entries

SNMP Engine ID

The Engine ID is a unique identifier used for SNMP V3 implementations. This is an alphanumeric
string used to identify the SNMP engine on the Switch.
To display the Switch's SNMP Engine ID, open the SNMP Manger folder, located in the Security
Management and click on the SNMP Engine ID link. This will open the SNMP Engine ID
Configuration window, as shown below.
To change the Engine ID, type the new Engine ID in the space provided and click the Apply button.
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
Figure 7- 36. SNMP Host Table Configuration window
Description
Type the IP address of the remote management station that will serve as the SNMP
host for the Switch.
V1 - To specifies that SNMP version 1 will be used.
V2 - To specify that SNMP version 2 will be used.
V3-NoAuth-NoPriv - To specify that the SNMP version 3 will be used, with a
NoAuth-NoPriv security level.
V3-Auth-NoPriv - To specify that the SNMP version 3 will be used, with an Auth-
NoPriv security level.
V3-Auth-Priv - To specify that the SNMP version 3 will be used, with an Auth-Priv
security level.
Type in the community string or SNMP V3 user name as appropriate.
link.
Figure 7- 37. SNMP Engine ID Configuration window
150
Show All