Ieee 802.1Q Vlans - D-Link DES-3526 Manual

The DES-3526 supports IEEE 802.1Q VLANs and Port-Based VLANs. The port untagging function
can be used to remove the 802.1Q tag from packet headers to maintain compatibility with devices that
are tag-unaware.
The Switch's default is to assign all ports to a single 802.1Q VLAN named "default."
The "default" VLAN has a VID = 1.
The member ports of Port-based VLANs may overlap, if desired.

IEEE 802.1Q VLANs

Some relevant terms:
• Tagging - The act of putting 802.1Q VLAN information into the header of a
• Untagging - The act of stripping 802.1Q VLAN information out of the packet
• Ingress port - A port on a switch where packets are flowing into the Switch and
• Egress port - A port on a switch where packets are flowing out of the Switch,
IEEE 802.1Q (tagged) VLANs are implemented on the Switch. 802.1Q VLANs require tagging,
which enables them to span the entire network (assuming all switches on the network are IEEE
802.1Q-compliant).
VLANs allow a network to be segmented in order to reduce the size of broadcast domains. All packets
entering a VLAN will only be forwarded to the stations (over IEEE 802.1Q enabled switches) that are
members of that VLAN, and this includes broadcast, multicast and unicast packets from unknown
sources.
VLANs can also provide a level of security to your network. IEEE 802.1Q VLANs will only deliver
packets between stations that are members of the VLAN.
Any port can be configured as either tagging or untagging. The untagging feature of IEEE 802.1Q
VLANs allows VLANs to work with legacy switches that don't recognize VLAN tags in packet
headers. The tagging feature allows VLANs to span multiple 802.1Q-compliant switches through a
single physical connection and allows Spanning Tree to be enabled on all ports and work normally.
The IEEE 802.1Q standard restricts the forwarding of untagged packets to the VLAN the receiving
port is a member of.
The main characteristics of IEEE 802.1Q are as follows:
Assigns packets to VLANs by filtering.
•
Assumes the presence of a single global spanning tree.
•
Uses an explicit tagging scheme with one-level tagging.
•
802.1Q VLAN Packet Forwarding
•
Packet forwarding decisions are made based upon the following three types of rules:
•
Ingress rules - rules relevant to the classification of received frames belonging to a VLAN.
•
Forwarding rules between ports - decides whether to filter or forward the packet.
•
Egress rules - determines if the packet must be sent tagged or untagged.
•
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
packet.
header.
VLAN decisions must be made.
either to another switch or to an end station, and tagging decisions must be
made.
60