System Log Server - D-Link DES-3526 Manual

Use the drop-down menus to configure the parameters described below.
Parameter
Severity Name
Severity Type
Click Apply to implement the new System Severity alert level.

System Log Server

The Switch can send Syslog messages to up to four designated servers using the System Log Server.
In the Configuration folder, click System Log Server, to view the window shown below.
The parameters configured for adding and editing System Log Server settings are the same. See the
table below for a description.
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
Figure 6- 48. System Severity Settings
Description
Choose how the alerts are used from the drop-down menu. Select log to send
the alert of the Severity Type configured to the Switch's log for analysis.
Choose trap to send it to an SNMP agent for analysis. Or select all to send the
chosen alert type to an SNMP agent and the Switch's log for analysis.
Choose what level of alert will trigger sending the log entry or trap message as
defined by the Severity Name. Select critical to send only critical events to the
Switch's log or SNMP agent. Choose warning to send critical and warning
events to the Switch's log or SNMP agent. Select information send
informational, warning and critical events to the Switch's log or SNMP agent.
Figure 6- 49. System Log Servers window
79