Honeywell Lynx Plus Series Installation And Setup Manual page 26

Lynx Plus Series Installation and Setup Guide
Data Field Descriptions
✻ ✻
Field 47 is used to program different options in the Lynx Plus and LynxSIA Plus controls.
Fields 47:
Please be sure that you use the correct field for the control being installed.
47 47 47 47
PHONE SYS PHONE PHONE PHONE SYS SEL SYS SYS SEL SELECT SEL ECT ECT ECT
Phone System Select
This option is used to enter the correct type of phone dialing (pulse or tone), and to
select the correct WATS line option for the Central Station. This option is used to
activate the Speaker Phone option. For the LynxSIA Plus it is also used to disable call
waiting.
Note: If using pulse dialing, you must enter the numbers slowly in order to allow the pulse
dialer time to operate.
LynxSIA Plus ONLY
Call waiting warning tones can interfere with Central stations reporting. The Call
Waiting Cancel option should be selected if the reporting phone line has call waiting
service. The Call Waiting Cancel command must also be programmed in Field ✻40. If
the Call Waiting Cancel feature is enabled, make sure to enter Call Waiting Cancel
command in Field ✻40. The command depends on a telephone service provider.
Important Note: If Call Wait Cancel is disabled in Field ✻47, and Call Waiting Disable
command is entered in Field ✻40, this will prevent successful communication to the central
station when used on a non-call waiting line.
Note: PABX number and operation of the control panel with a PBX system cannot be used
if the Call Waiting Cancel option has been enabled in Field ✻47.
Lynx Plus SELECTIONS
Central
Station
Pulse
No WATS 0 = No Speaker
Phone
WATS 2 = No Speaker
Phone
LynxSIA Plus SELECTIONS
Central
Station
Pulse
No WATS 0 = No Speaker
Phone/Call Wait
Cancel Disabled
WATS 2 = No Speaker
Phone/Call Wait
Cancel Disabled
No WATS 8 = No Speaker
Phone/Call Wait
Cancel Enabled
WATS 10 = No Speaker
Phone/Call Wait
Cancel Enabled
Dialing Mode
Tone
1 = No Speaker
Phone
3 = No Speaker
Phone
Dialing Mode
Tone
1 = No Speaker
Phone/Call Wait
Cancel Disabled
3 = No Speaker
Phone/Call Wait
Cancel Disabled
9 = No Speaker
Phone/Call Wait
Cancel Enabled
11 = No Speaker
Phone/Call Wait
Cancel Enabled
- 26 -
Pulse Tone
4 = Speaker 5 = Speaker
Phone Phone
6 = Speaker 7 = Speaker
Phone Phone
Pulse Tone
4 = Speaker 5 = Speaker
Phone/Call Wait Phone/Call Wait
Cancel Disabled Cancel Disabled
6 = Speaker 7 = Speaker
Phone/Call Wait Phone/Call Wait
Cancel Disabled Cancel Disabled
12 = with 13 = Speaker
Speaker Phone Phone/Call Wait
Call Wait Cancel Cancel Enabled
Enabled
14 = Speaker 15 = Speaker
Phone/Call Wait Phone/Call Wait
Cancel Enabled Cancel Enabled