(3) Tilt the CIS unit towards you to release the rear latches from the main frame, and the
CIS unit comes off.
CIS harness
(4) Remove the CIS holders R and L as shown below.
CIS holder, L
CIS harness
Reassembling Notes
•
When reinstalling the CIS unit, pass the CIS harness through the cutout provided in the
main frame.
First, hook the front latches of the CIS holders in the main frame while pressing the CIS
unit against the leaf spring and then hook the rear latches.
CIS unit
Leaf spring
IV – 25
Rear latch
CIS holder
Front latch
CIS holder, R
CIS unit