Model; Color - Brother FAX1170 Service Manual

Selector
No.
1
Detection threshold level for
voice signals inputted via the
|
network in the built-in TAD
operation
3
4
First communications speed
choice for PCI
5
Report output of polled trans-
6
mission requests
7
Comfortable noise level
8
NOTE: The WSW33 is applicable to those models equipped with a built-in TAD.
Selectors 1 through 3:
If the equipment detects voice signals exceeding the threshold level set by these selectors, it
will interpret them as effective voice.
Selectors 4 and 5: First communications speed choice for PCI (For those models equipped
with a built-in TAD)
These selectors are used to set the first communications speed choice with which the equip-
ment attempts to synchronize the data transmission via the PC interface. If the synchroniza-
tion fails, the equipment automatically steps down to the next lowest speed.
Selector 6: Report output of polled transmission requests
This function does not apply in the U.S.A. versions.
Selectors 7 and 8: Comfortable noise level
These selectors set the level of noise to be added during playing-back of voice signals re-
corded with no-signal compression.
If they are set to "0, 0," no noise will be added.
WSW33
(Function setting 11)
Function
Detection threshold level for voice signals inputted via the network in
the built-in TAD operation
V – 45
Setting and Specifications
No. 1 2 3
0 0 0 : -42.5 dBm
0 0 1 : -44.0 dBm
0 1 0 : -45.5 dBm
0 1 1 : -47.0 dBm
1 0 0 : -48.5 dBm
1 0 1 : -50.0 dBm
1 1 0 : -51.5 dBm
1 1 1 : -53.0 dBm
No. 4 5
0 0 : 14,400 bps
0 1 : 12,000 bps
1 0 : 9,600 bps
1 1 : 7,200 bps
0: YES 1: NO
No. 7 8
0 0 : OFF
0 1 : Low
1 0 : Medium (B)
1 1 : High
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(A)
(C)