Color - Brother FAX1170 Service Manual

1.19 Separation Roller, its Support, and Document Rear Sensor Actuator
(1) At the left side of the main frame, remove the spring and pull out the clutch lever by
pulling its pawl outwards.
(2) Remove the gear 20/40, and then remove the gear 33 by pulling its pawl outwards.
(3) Pull the latch towards you and pull out the separation roller gear to the left, and the
separation roller comes off.
Main frame
Gear 33
Separation
roller gear
Clutch lever
Spring
(4) As shown below, release the latch with the tip of a flat screwdriver and slide the separa-
tion roller support to the right and lift it up.
Gear 20/40
Separation roller support
IV – 33
Separation roller
Latch
Latch