Color - Brother FAX1170 Service Manual

Detailed Description for the Firmware Switches
Selector
No.
1
Dial pulse generation mode
2
3
Break time length in pulse
dialing
4
5
Inter-digit pause
6
Switching between pulse (DP)
and tone (PB) dialing, by the
7
function switch
Default dialing mode, pulse
8
(DP) or tone (PB) dialing
Selectors 1 and 2: Dial pulse generation mode
These selectors set the number of pulses to be generated in pulse dialing.
N: Dialing "N" generates "N" pulses. (Dialing "0" generates 10 pulses.)
N + 1: Dialing "N" generates "N + 1" pulses.
10 - N: Dialing "N" generates "10 - N" pulses.
Selectors 3 and 4: Break time length in pulse dialing
These selectors set the break time length in pulse dialing.
(Example: If "1," "2," and "3" are dialled when N is set by selectors 1 and 2.)
Break time length set by
selectors 3 and 4
Selectors 5 and 6: Inter-digit pause
These selectors set the inter-digit pause in pulse dialing.
(Example: If "1," "2," and "3" are dialled when N is set by selectors 1 and 2.)
WSW01
(Dial pulse setting)
Function
"1" "2"
"1" "2"
V – 11
Setting and Specifications
No. 1 2
0 0 : N
0 1 : N+1
1 0 : 10-N
1 1 : N
No. 3 4
0 0 : 60 ms
0 1 : 67 ms
1 0 : 40 ms (for 16 PPS)
1 1 : 64 ms (at 106-ms intervals)
No. 5 6
0 0 : 800 ms
0 1 : 850 ms
1 0 : 950 ms
1 1 : 600 ms
0: Yes 1: No
0: PB 1: DP
"3"
"3"
Inter-digit pause set by
selectors 5 and 6