3.7
Sensor Operational Check
Function
This function allows you to check that the seven sensors (document front sensor, document
rear sensor, cover sensor, paper ejection sensor, paper-edge sensor, ribbon sensor, and
hook switch sensor*) operate correctly.
In the FAX1010 and those versions equipped with a Binatone handset, the LCD shows the
"FRERCJMPHRX
- the document front and rear sensors detect no paper (FRE),
- the recording paper cover ASSY is closed (RC),
- the paper ejection sensor detects no paper jam (JM),
- the paper-edge sensor detects paper loaded and the paper front cover is closed (PH),
and
- the ribbon sensor detects the ribbon cartridge loaded (RX).
In other models, the LCD shows the "FRERCJMPHRXHK 1" when
- the document front and rear sensors detect no paper (FRE),
- the recording paper cover ASSY is closed (RC),
- the paper ejection sensor detects no paper jam (JM),
- the paper-edge sensor detects paper loaded and the paper front cover is closed (PH),
- the ribbon sensor detects the ribbon cartridge loaded (RX), and
- the hook switch sensor detects the on-hook state (HK).
Operating Procedure
(1) Press the 3 and 2 keys in this order in the initial maintenance mode. The equip-
ment sounds 1100 Hz and 400 Hz tones cyclically through the following volumes for
testing the speaker:
In the FAX1010 and those versions equipped with a Binatone handset, the LCD shows
the "FRERCJMPHRX
above.
In other models, the LCD shows the "FRERCJMPHRXHK 1" if the detecting conditions
of the seven sensors are as defined above.
(* In the FAX1010 and those versions equipped with a Binatone
handset, the hook switch sensor serves no function.)
1" when
In this area a numeral appears, indicating the number of
communications records printed out at the factory for testing.
1100 Hz
Low → Meduim → High
OFF
400 Hz
High ← Meduim ← Low
1" if the detecting conditions of the six sensors are as defined
V – 50
In this area a numeral
appears, indicating the
number of communications
records printed out at the
factory for testing.
OFF