Color - Brother FAX1170 Service Manual

Selector
No.
1 CCD manufacturer setting
2 Detection enabled time for CNG
3
and no tone
4
Not used.
5
6 Registration of station ID
7
Tone sound monitoring
8
Selector 1: CCD manufacturer setting
Reserved for future variation of CCD.
Selectors 2 and 3: Detection enabled time for CNG and no tone
After the line is connected via the external telephone, the equipment can detect a CNG sig-
nal or no tone for the time length specified by these selectors. The setting specified by these
selectors becomes effective only when selector 8 of WSW20 is set to "1."
Selector 6: Registration of station ID
Setting this selector to "0" permits the registration of station ID for Austrian and Czecho ver-
sions.
Selectors 7 and 8: Tone sound monitoring
These selectors sets monitoring specifications of the tone sound inputted from the line.
WSW18
(Function setting 3)
Function
V – 31
Setting and Specifications
Fixed to 1.
No. 2 3
0 0 : 40 sec.
0 1 : 0 sec. (No detection)
1 0 : 5 sec.
1 1 : 80 sec.
0: Permitted 1: Prohibited
No. 7 8
0 X : No monitoring
1 0 : Up to phase B at the
calling station only
1 1 : All transmission phases
both at the calling and
called stations