Intellinet 523875 User Manual page 18

be known in advance to make a connection.
• apply Changes: Click to save and apply the current settings.
• reset: Click to clear and reset the current settings.
access Control: Click "Setup"
to display the Wireless
Access Control screen and
options.
• Wireless access Control
mode: Select on option
from the pull-down menu.
- disable: Select to
disable this mode.
- allow listed: Only the stations shown in the table can associate
with the AP.
- deny listed: Stations shown in the table won't be able to associate
with the AP.
• maC address: Enter the MAC address of a station that's allowed
to access this access point.
• Comment: Enter up to 20 characters in reference to the previous
MAC Address field.
• apply Changes: Click to save the new settings on the screen.
• reset: Click to discard the data entered since the last time "Apply
Changes" was clicked.
• delete Selected: To delete clients on the access list (to this AP),
click "Select" next to the corresponding MAC address and comments,
then click "Delete Selected."
• delete all: To delete all the clients on the access list (to this AP),
click "Delete All" without selecting individual addresses.
• reset: Click "Reset" to clear any/all selected items.
Wan port: Click "Setup" to display the WAN Port Configuration screen
and options.
• Wan access Type: Select the WAN access type (Static IP, DHCP,
PPPoE or PPTP) from the pull-down menu.
• attain dnS automatically: Select to activate as needed.
• Set dnS manually: Select to activate as needed.
1
CONFIGURATION VIA THE WEB