Intellinet 523875 User Manual page 10

digits or five ASCII characters are needed if 64-bit WEP is used;
26 hexadecimal digits or 13 ASCII characters if 128-bit WEP is
used.
- pre-Shared Key Format: Select "Passphrase" or "Hex" (64
characters).
- pre-Shared Key: Pre-Shared Key serves as a password. Key in an
8- to 63-character string to set the password or leave it blank, in
which case the 802.1x Authentication will be activated. Make sure
the same password is used on the client end.
- Group Key life Time: Enter the number of seconds that will elapse
before the group key changes automatically. The default is 86,400
seconds.
• enable pre-authentication: This enables secure fast roaming
without noticeable signal latency. Pre-authentication provides a way
to establish a PMK (pairwise master key) security association before
a client connects, with the advantage being that the client reduces the
time that it's disconnected to the network.
- authentication radiUS Server: RADIUS is an authentication
authorization and accounting client-server protocol. The client is
a network access server which has access to a user database with
authentication information and which desires to authenticate its
links.
- port: Enter the RADIUS server's port number provided by your ISP.
The default is 1812.
- ip address: Enter the RADIUS server's IP address provided by
your ISP.
- password: Enter the password that the AP shares with the RADIUS
server.
• enable accounting: Check to enable this function.
- accounting radiUS Server: Enter the port, IP address and
password as above.
• apply Changes: Click to save and apply the current settings.
• reset: Click to clear and reset the current settings.
10
CONFIGURATION VIA THE WEB