Intellinet 523875 User Manual page 19

• dnS 1–3: Enter the DNS server IP
address(es) provided by your ISP,
or specify your own preferred DNS
server IP address(es). NOTE: The
DNS 2 and DNS 3 servers are
optional. They will be used if/when
the DNS 1 server fails.
• respond to Wan ping: Select in
order for the router to respond to
ping commands originating from the
WAN (Internet). NOTE: As a security precaution, this option should
not be selected.
• enable Upnp: Universal Plug and Play (UPnP) allows Windows
Me and XP to automatically configure the router for various Internet
applications, such as gaming and videoconferencing. To use UPnP,
select "Enable UPnP."
• Save: Click to save and apply the current settings.
• reset: Click to clear and reset the current settings.
• Close: Click to exit the current settings.
Virtual Server: Click
"Setup" to display the
Virtual Servers screen
and options.
• enable Virtual
Servers: Select as
needed.
• Servers: Make a
selection from the
pull-down menu.
• local ip address:
Enter the local server's IP address.
• protocol: Select the protocol ("TCP," "UDP" or "Both") used by the
remote system or service.
• port range: For TCP and UDP services, enter the beginning of
the range of port numbers used by the service. If the service uses
CONFIGURATION VIA THE WEB
1