Intellinet 523875 User Manual page 20

a single port number, enter it in both the Start and Finish fields.
• description: You may key in a description for the local IP address.
• Save: Click to save and apply the current settings.
• reset: Click to clear and reset the current settings.
• Current Virtual Servers Table: Shows the current virtual servers
information.
dmZ: Click "Setup" to display the DMZ screen and options.
• enable dmZ: If the DMZ Host
Function is enabled, it means that
a DMZ host has been set up at a
particular computer to be exposed
to the Internet so that some
applications/software, especially Internet/online games, can have
two-way connections.
• dmZ Host ip address: Enter the IP address of a particular host in
your LAN that will receive all the packets originally going to the WAN
port/public IP address above.
• Save: Click to save the current settings.
• reset: Click to restore to the default values.
NOTE: You need to give your LAN PC clients a fixed/static IP address
for the DMZ function to work properly.
remote management: Click "Setup" to display the Remote Management
screen and
options.
• enable Web
Server
access
via Wan:
Select to permit remote access to the router from outside the local
network. Otherwise, keep the default setting (unselected).
• port number: Enter the port number that will be open to outside
access.
• Save: Click to save the current settings.
• reset: Click to restore to the default values.
Url Filter: Click "Setup" to display the URL Filtering screen and options.
20
CONFIGURATION VIA THE WEB