Table of Contents
Advertisement
c
/c
m
lient
lient
alias name: Displays the device name.
Band: The drop-down menu offers three options:
• 2.4 GHz (B) — 802.11b supported rate only.
• 2.4 GHz (G) — 802.11g supported rate only.
• 2.4 GHz (B+G) — Both 802.11b and 802.11g supported rate.
The default is 2.4 GHz (B+G) mode.
SSid: The service set identifier (SSID) differentiates one WLAN from
another; therefore, all access points and devices attempting to connect
to a specific WLAN must use the same SSID. It is case-sensitive and
must not exceed 32 characters. A device will not be permitted to join the
basic service set (BSS) unless it can provide the unique SSID. An SSID
is also referred to as a network name because, essentially, it is a name
that identifies a wireless network.
Security: Click "Setup" to display the Security screen and options.
• authentication Type: Select an option from the pull-down menu;
e.g., "Open System or Shared Key," "Open System," "Open System
with 802.1x," "Shared Key," "WPA-PSK" and "WPA2-PSK."
• encryption: Make a selection from the pull-down menu.
22
CONFIGURATION VIA THE WEB
s
ode
ettings
Advertisement
Table of Contents
