Table of Contents
Advertisement
- allow listed: Only the stations shown in the table can associate
with the AP.
- deny listed: Stations shown in the table won't be able to associate
with the AP.
• maC address: Enter the MAC address of a station that's allowed
to access this access point.
• Comment: Enter up to 20 characters in reference to the previous
MAC Address field.
• apply Changes: Click to save the new settings on the screen.
• reset: Click to discard the data entered since the last time "Apply
Changes" was clicked.
• delete Selected: To delete clients on the access list (to this AP),
click "Select" next to the corresponding MAC address and comments,
then click "Delete Selected."
• delete all: To delete all the clients on the access list (to this AP),
click "Delete All" without selecting individual addresses.
• reset: Click "Reset" to clear any/all selected items.
WdS Setting: Click "Setup"
to display the WDS
(wireless distribution
system) Setting screen
and options.
• maC address: Enter
the MAC address of a
station that's allowed
to access this AP.
• Comment: Enter up to 20 characters in reference to the previous
MAC Address field.
• apply Changes: Click to save the new settings on the screen.
• reset: Click to discard the data entered since the last time "Apply
Changes" was clicked.
CONFIGURATION VIA THE WEB
1
Advertisement
Table of Contents
