Camera Block; Link Bracket - Hitachi DZ-MV580EAU Service Manual

Disassembly and Reassembly > Disassembly

(16) Camera Block

1) Remove two screws [F], and then remove the camera block (a).
Procedure and caution for reassembly
Fit the hook (c) of camera frame onto the square hole (d) in frame before tightening the screws.
Note:
Take great care when handling the camera block: The camera block contains the lens unit, which is
a precision component. Subjecting the lens unit to any impact could result in a fault.
(a) Camera block
(b) Frame
(c) hook of camera frame
(d) square hole in frame
(b)

(17) Link Bracket

1) Remove two screws [H], and then remove
the link bracket (a).
(d)
(c)
1) [F]
DZ-MV550E
DZ-MV580E
1) [F]
1) [F]
Fig. 5-3-18
(a) Link bracket
5 - 13
(a)
1) [F]
(a)
[F] M1.6x2.5 (Black)
[H] M1.6x2 (Gold)
Fig. 5-3-19
(a)
1) [H]