Replacing Major Components - Hitachi DZ-MV580EAU Service Manual

Adjustment > List of Adjustment Items
6-3-2 List of Adjustments Needed After Replacing Major Components
Item
(EEPROM backup data already
Initial Data Write
Video Level
Burst Level
Sampling Pulse
Autofocus
Auto Iris Control
Matrix
Chroma Gain
Spot Noise
LCD PLL
LCD Contrast-1
(*4)
LCD Bright
(*4)
LCD Contrast-2
(*4)
LCD White Balance
EVF BL DET Check
EVF PLL
EVF Contrast
EVF Bright
EVF White Balance
*1: Be sure to perform "4-9-2 EEPROM data backup and write" before replacing the MAN-H/MAN circuit
board.
*2: "EEPROM data backup disabled" refers to when the backup of EEPROM data from the MAN-H/MAN
circuit board to be replaced could not be properly executed due to some fault, such as the DVD video
camera/recorder not being turned on, etc.
*3: When replacing the EVF unit, be sure to perform EVF backlight check between the replaced and new
EVF units.
*4: The following three items cannot be performed singly. Be sure to perform these adjustments as a set
with the three items, and in the order stated:
LCD contrast – 1
LCD bright
LCD contrast – 2
MAN-H/MAN circuit board
written)
Major Components
(*1)
MAN-H/MAN circuit board
(EEPROM data backup
disabled)
6 - 21
(*1)
EVF LCD
unit (*3) unit
(*2)