Gyr Circuit Board, Lens Frame, And Lens Unit In Dz-Mv550E - Hitachi DZ-MV580EAU Service Manual

Disassembly and Reassembly > Disassembly
(23) GYR Circuit Board, Lens Frame, and
Lens Unit in DZ-MV550E
Information:
The DZ-MV550E lens unit is set as a service
component: It includes the parts equivalent to
cushion rubber, crystal filter, CCD image
sensor and SEN-H circuit board of DZ-
MV580E.
GYR Circuit Board (a)
1) Remove two screws [D], and then remove the
GYR circuit board.
Lens Frame (b) and Lens Unit (c)
2) Remove two screws [D], and then remove the
lens frame.
Caution:
1) The lens unit is a precision component: Take
great care when handling it. Do not allow
any dust to adhere to it, and do not subject it
to damage or impact: Doing so could cause a
fault.
2) Do not disassemble the lens unit: Doing so
could cause a fault.
(a) GYR circuit board
(b) Lens frame
(c) Lens unit
(b)
[D] M1.7x4 (Black)
5 - 18
1) [D]
(a)
2) [D]
(c)
Fig. 5-3-27