Hitachi DZ-MV580EAU Service Manual page 39

Troubleshooting > Messages and Troubleshooting
Message
Disc error has occurred.
Format the disc now?
YES NO
Disc error has occurred.
Formatting is not complete.
Disc error has occurred.
Keep disc inside & restart.
Disc full.
Cannot execute.
Disc has no data.
Disc has no PlayList.
Disc includes protected
scenes.
Delete scenes?
YES NO
Disc is full.
Cannot add control info.
Cause/condition for
message to appear
Appears when a DVD-RAM disc
initialized on PC, etc., or a card whose
initialization was suspended before, is
loaded.
Appears when the disc could not be
normally formatted because it was dirty.
Also appears when a warped or distorted
disc was loaded, or a logically damaged
disc whose formatting was suspended is
loaded.
Appears if a problem has occurred during
editing of video file.
Appears if the recording capacity of disc
has reached the limit during editing of
video file.
Appears when the MANU button or
playback button was pressed with no
scene recorded.
Appears if switching of play list is
selected with no play list registered.
Appears if the loaded disc has a program
(scene) that is write-protected by the
software write-protect function, which is
effective in program units. Although the
DVD video camera/recorder is equipped
with a software disc-protect function that
is effective for disc units, it does not
comply with software write-protect for
program units. (The DVD Forum defines
two types of software protect for DVD-
RAM disc: disc units and program units.)
Appears if the number of scenes on play
list exceeds the upper limit (999) while
control information is being added.
[Refer to *1 page 4-9]
4 - 13
Troubleshooting
Choose "YES" and designate it to
initialize the DVD-RAM disc
(deleting all recorded data).
Clean the disc, or replace it.
[Refer to page 4-11]
Replace the disc.
Exit the Disc Navigation function and
set the power switch to "POWER
OFF" with the disc loaded; then
reconnect the AC adapter/charger
and set the power switch to "VIDEO"
or "PHOTO (disc)". (The DVD video
camera/recorder will automatically
repair the video file.)
Delete unnecessary scenes, or replace
the disc.
Operate the DVD video camera/
recorder after the message
disappears.
Operate the DVD video camera/
recorder after the message
disappears.
Release the write-protect using the
device that has the software write-
protect function for program units, or
choose "YES" and designate it to
delete the scenes.
Delete any unnecessary scenes, or
combine several scenes, and then
operate the DVD video camera/
recorder.