Settings For Adjustment - Hitachi DZ-MV580EAU Service Manual

Adjustment > Setups for Adjustment

6-2-5 Settings for Adjustment

When the connections for adjustment are complete, set the DVD video camera/recorder and test
equipment as follows:
(1) Setting the DVD video camera/recorder
Information:
This item is the same as when creating reference data.
1) Make sure that no disc or card is inserted: Neither is necessary when creating reference data.
2) Set the power switch to "VIDEO" and quick mode switch to "OFF": After that operate the DVD
video camera/recorder while watching the LCD monitor screen.
3) Press the MENU button to display the menu screen.
4) Use the joystick to choose "Initial Setup", and then press the center of joystick.
5) Use the joystick to choose "Reset", and then press the center of joystick: The screen for verifying
reset will appear.
6) Use the joystick to choose "ENTER", and then press the center of joystick: Reset will be executed.
7) When reset is complete, operate the joystick by the above procedure to set the items on menu
screens as follows:
a) Specify Demo Mode "Off" in Initial Setup menu. Failing to specify Demo Mode "Off" will
interfere with adjustment.
8) Press the MENU button to restore the normal display.
Information:
The following table shows the menu status after the above settings:
The settings for Date Setup are not shown in the table below, since they do not have any meaning
when creating reference data.
Item
Camera Functions Setup
Program AE
White Balance
EIS
Dig. Zoom
MIC Filter
16:9
Recording Functions Setup
VIDEO Mode
Quality
Input Source
(*1)
PHOTO Input
(*1)
Self Timer
OSD Output
Setting
Auto Brightness
Auto Color Level
On
×40
Beep
Off
Power Save
Off
Record LED
Language
FINE Demo Mode
FINE
CAMERA
Field
Off
Off
6 - 15
Item
LCD Setup
Initial Setup
*1: Dispaly only on models that have the line
input function.
Setting
+
+
On
Off
On
English
Off