Settings For Adjustment - Hitachi DZ-GX5020A K Service Manual

Adjustment > Setups for Adjustment

6-2-4 Settings for Adjustment

When the connections for adjustment are complete, set the DVD video camera/recorder and test
equipment as follows:
(1) Setting the DVD video camera/recorder
Information:
This item is the same as when creating reference data.
1) Make sure that no disc or card is inserted: Neither is necessary when adjustment.
2) Set the power switch to "Movie": After that operate the DVD video camera/recorder while
watching the LCD monitor screen.
3) Press the MENU button to display the camera function setup screen.
4) Use the / /
5) Use the / /
6) Use the / /
7) When reset is complete, use the above procedure to operate the
16:9 in the Recording Function Setup manu to "off", set Demo Mode in the Initial Setup menu to
"Off": Forgetting to set it to "Off" will cause a problem during adjustment.
8) Press the MENU button to restore the normal display.
Information:
The following table shows the menu status after the above settings:
The settings for Date Setup are not shown in the table below, since they do not have any meaning
when adjusting.
Item
Camera Functions Setup
Program AE
White Bal.
EIS
Dig. Zoom
MIC Filter
Recording Functions Setup
VIDEO Mode
Quality
16:9
Self Timer
OSD Output
/ buttons to choose "Initial Setup", and then press the
/ buttons to choose "Reset", and then press the
/ buttons to choose "YES", and then press the
Setting
Auto
Auto
On
(*1)
100×/120×
Off
FINE
FINE
Off
Off
Off
Item
LCD/EVF Setup
LCD Brightness
EVF Brightness
Color Level
EVF Display
Initial Setup
Beep
Power Save
Record LED
Language
Demo Mode
*1: 100x will appear on DZ-GX5000A; and 120x
on DZ-GX5080A/DZ-GX5020A.
6 - 14
button.
button.
button.
/ / / buttons and set
Setting
Auto
On
Off
On
English
Off