Avaya 4600 Series Administrator's Manual page 98

Server Administration
Table 8: LLDPDU Transmitted by the 4600 Series IP Telephones (continued)
Category
Basic Optional
Basic Optional
IEEE 802.3
Organization
Specific
TIA LLDP MED
TIA LLDP MED
TIA LLDP MED
TIA LLDP MED
TIA LLDP MED
TIA LLDP MED
TIA LLDP MED
TIA LLDP MED
98 4600 Series IP Telephone LAN Administrator Guide
TLV Name (Type)
System Capabilities
Management Address
MAC / PHY
Configuration / Status
LLDP-MED
Capabilities
Network Policy
Inventory – Hardware
Revision
Inventory – Firmware
Revision
Inventory – Software
Revision
Inventory – Serial
Number
Inventory –
Manufacturer Name
Inventory – Model
Name
TLV Info String (Value)
Bit 2 (Bridge) will be set in the System
Capabilities if the telephone has an internal
Ethernet switch. If Bit 2 is set in Enabled
Capabilities then the secondary port is
enabled.
Bit 5 (Telephone) will be set in the System
Capabilities. If Bit 5 is set in the Enabled
Capabilities than the telephone is registered.
Mgmt IPv4 IP Address of telephone.
Interface number subtype = 3 (system port).
Interface number = 1.
OID = SNMP MIB-II sysObjectID of the
telephone.
Reports autonegotiation status and speed of
the uplink port on the telephone.
Media Endpoint Discovery - Class III - IP
Telephone.
Tagging Yes/No, VLAN ID for voice, L2 Priority,
DSCP Value.
MODEL - Full Model Name.
BOOTNAME.
APPNAME.
Telephone serial number.
Avaya.
MODEL4 - 4 character name.
2 of 3